Onursal Üyeler


  • FERSEN KINAYYİĞİT – KOMPOZİT SANAYİCİLERİ DERNEĞİ
  • İSMAİL HAKKI HACIALİOĞLU – KOMPOZİT SANAYİCİLERİ DERNEĞİ
FERSEN KINAYYİĞİT – KOMPOZİT SANAYİCİLERİ DERNEĞİ

Hakkında

Kompozit Sanayicileri Derneği, Türk Kompozit Sanayi’nin ham madde, yarı, ara ve nihai ürün üreticilerini, tedarikçilerini ve akademik kurumlarını temsil eden, kar amacı gütmeyen bir dernektir. 18 Mayıs 2005 tarihinde kurulmuştur.


İletişim

Yenişehir, Ankara Cd. No:360 Office Plaza 405 Kat:3 Daire:68, 34912 Pendik/İstanbul

Tel: +90 (216) 685 12 68
E-posta: info@kompozit.org.tr
Web: www.kompozit.org.tr

İSMAİL HAKKI HACIALİOĞLU – KOMPOZİT SANAYİCİLERİ DERNEĞİ

Hakkında

Kompozit Sanayicileri Derneği, Türk Kompozit Sanayi’nin ham madde, yarı, ara ve nihai ürün üreticilerini, tedarikçilerini ve akademik kurumlarını temsil eden, kar amacı gütmeyen bir dernektir. 18 Mayıs 2005 tarihinde kurulmuştur.


İletişim

Yenişehir, Ankara Cd. No:360 Office Plaza 405 Kat:3 Daire:68, 34912 Pendik/İstanbul

Tel: +90 (216) 685 12 68
E-posta: info@kompozit.org.tr
Web: www.kompozit.org.tr

2017 Kompozit Sanayicileri Derneği | Tüm hakları saklıdır

Material Properties / Requir. for E-Mobility

Mart 2, 2021
Görsel-Template-17-1200x675.jpg

AVK “E-mobilite için malzeme özellikleri ve gereksinimleri” çalışma grubunun Mart ayı toplantısını çevrimiçi olarak 24 Mart 2021 tarihinde gerçekleştireceğine ilişkin duyuru aşağıda yer almaktadır. Katılmak isteyenler info@avk-tv.de adresine başvurabilirler

Kick-off event – agenda

AVK working group “Material properties and requirements for e-mobility”

The kick-off event of the new AVK working group “Material Properties and Requirements for E-Mobility” will take place on March 24, 2021 from 11:00 a.m. to 2:00 p.m. as an online event (via zoom). The participants get an overview of the special properties and requirements for (composites) materials within the scope of new e-mobility concepts.

Participation in AVK working groups is only possible for AVK member companies. For this kick-off event, non-members are also invited once as guests. At the end of the event, there should be a roadmap with priorities and the further procedure should be jointly determined.

agenda
Part 1 – Keynote speeches “Materials for E-Mobility Applications” :

11.00 a.m. – welcome
(Dr. Michael Effing & Dr. Elmar Witten, AVK)

11.15 a.m. – Economic development in the vehicle market and plastics processing
(Michael Weigelt, TecPart)

11.30 a.m. – Conductive plastics in the context of electromobility
(Thies Falko Pithan, Plastics Institute Lüdenscheid)

11.45 a.m. – Plastics in high-voltage contact: ignition behavior and flammability
(Frank Reuter, Celanese)

12.00 noon – Multifunctional high-performance fiber-plastic composites
(Dr. Sebastian Schmeer, IVW)

12.15 p.m.
Questions and discussion about the keynote speeches

12.30 p.m. – lunch break

Part 2 – Keynote speeches “Research & Development” :

1.00 p.m. – Directly cooled electric motor with integral lightweight housing made of fiber-reinforced plastic – DEmiL
(Robert Maertens, Fraunhofer Institute for Chemical Technology ICT)

1:15 p.m. – Composite material solutions for e-mobility
(Warden Schijve, AZL)

1.30 p.m. – Powder Resin System – a new way of composites manufacturing
(Marcel Schubiger, Swiss CMT AG)

1.45 p.m.
Questions and discussion about the keynote speeches

2 p.m.
Part 3 – EV Charging: UL’s range of tests for electrical charging stations and their components at the Frankfurt site
(UL GmbH)

2.15 p.m.
4th part – Determination of the further procedure
(Dr. Michael Effing & Dr. Elmar Witten, AVK)

  • Establishment of an AVK working group
  • Content, schedule, next steps, publication

2.30 p.m. – end of the event

If you would like to take part in the event, please send us an email: info@avk-tv.de

Best regards from Frankfurt am Main

 
Dr. Elmar Witten
AVK managing director

E-Bülten - Dergi Üyeliği

X