Görsel-Template-17-1200x675.jpg
Sektörden Haberler

The European Market for Fibre Reinforced Plastics

Mayıs 11, 2022

Avrupa 2021 yılı kompozit pazarı bilgilerini okumak için aşağıdaki linke tıklayınız.

The European Market for Fibre Reinforced Plastics / Composites in 2021
The AVK – Industrievereinigung Verstärkte Kunststoffe – has published its annual market report for fibre reinforced plastics/composites. The composites market almost returns to pre-crisis levels in 2021.
European Market for Fiber Reinforced Plastics and Composites 2021896,4 KB
Sunu1-7-1200x675.jpg
Sektörden Haberler

Sustainable Composite Pressure Vessels

Mayıs 11, 2022

Ortakları B&M Longworth ve Cygnet Texkimp ile NCC, hidrojen piyasası için sürdürülebilir kompozit basınçlı kaplar sağlamak için önemli bir ilk adımda sürekli karbon fiber geri kazanımı elde etti. Ayrıntılı bilgi almak için aşağıdaki linklere tıklayınız.

Engineers at the National Composites Centre (Bristol, U.K.), the U.K.’s center of excellence for advanced composite applications, along with British SME partners B&M Longworth (Edgworth, U.K.) and Cygnet Texkimp (Northwich, Cheshire, U.K.), have successfully reclaimed continuous carbon fibers from a whole pressure vessel and re-used them to manufacture a new pressure vessel.

https://www.compositesworld.com/news/uk-team-successfully-recycles-reclaimed-continuous-carbon-fibers-from-pressure-tanks

The National Composites Centre was created as the UK’s Centre of Excellence for Composites Research and Development following the inclusion of this disruptive technology into government industrial strategy. 

https://www.nccuk.com/

Cygnet Texkimp is a leading global provider of fibre handling and converting technology

https://cygnet-texkimp.com/

Gorsel-Template-22-1200x675.jpg
Sektörden Haberler

From Waste to Secondary Resource

Mayıs 11, 2022

Doğru geri dönüşüm ekipmanı ile atıktan ikincil kaynağa. Ayrıntılı bilgi almak için aşağıdaki linke tıklayınız.

In an era of soaring raw material prices, high quality re-granulate becomes a cost-saving alternative to virgin material. Recycling of production and post-consumer waste means adapting to continual changes in incoming materials. Engineering must also take into account potential uses of the recycled product. This poses challenges not only for the line itself, but above all for us as developers and suppliers of innovatively designed plants.

https://www.starlinger.com/en/recycling/recostar-product-line/

MITSUBISHI-1200x675.jpg
Sektörden Haberler

Aircraft Cabin Interior Sidewall Panels

Mayıs 11, 2022

Uçak kabini iç yan duvar panellerinin imalatı için geri dönüştürülmüş karbon fiber (rCF) kullanımının fizibilitesi için kalıplama denemeleri hakkında bilgi almak için aşağıdaki linklere tıklayınız.

The recovery and reuse of carbon fibre waste during production processes and end–of–life applications, such as automotive and aeronautics, has proved to be economically viable. This supports the implementation of the EU Waste Framework Directive (2008/98/EC) to greatly reduce landfill disposal which is environmentally essential and is also in line with targets set by the EU Circular Economy Package for sustainable production practices.

KyronTEX® is fully recyclable. Any waste created during production or at end-of-life can later be recycled into high-performance engineering materials. Our technology infrastructure enables the use of recycled carbon fiber (rCF) materials at a constant and consistent quality, while our vertically integrated structure and industrial scale recycling facilities ensure we can produce CFRTP composites with the lowest emissions in the industry.

https://composites.mcam.com/kyrontex

Carbon Fiber and Advanced Composite Materials - Mitsubishi Chemical3,2 MB
Cannon-Ergos-collaborates-with-Boeing-for-rCF-sidewall-panels399,5 KB
ALTAIR-1200x675.jpg
Bildirimler

Kompozit Yapıların Analiz ve Optimizasyonu

Mayıs 11, 2022

Altair firması tarafından düzenlenen “Kompozit Yapıların Analiz ve Optimizasyonunda Ply tabanlı FE Modelleme Yaklaşımı” hakkındaki bilgiler aşağıdab yer almaktadır.

Web Seminer Adı : Kompozit Yapıların Analiz ve Optimizasyonunda Ply tabanlı FE Modelleme Yaklaşımı
KAYIT : https://www.bigmarker.com/gardner-business-media-inc-w1/Ply-Based-Modeling-What-s-the-Point?utm_bmcr_source=Altair
Konuşmacı : Robert Jopson  – Sr. Product Manager – Composite Technology on Altair Engineering
Web Seminer İçeriği :
The ply-based shell modeling methodology for analysis and optimization of composite materials has led to a paradigm shift in composite structural simulation. This methodology allows composite simulation data to closely parallel the data necessary to physically manufacture composite products. Generally, this is an advantage over purely mathematical analysis methods like zone-based modeling because the specifics of a given composite product must be taken into consideration during the design phase, and ultimately the results of any final simulation or optimization will require fully defined manufacturing data. Additionally, there are significant benefits to maintaining macroscopic composite models defined at a material “scale 2”, or the scale of the homogenized tow and matrix materials for a single tow layer, but it can be challenging to manage the details of a composite product at this scale.

New “Ply Slices” technology in HyperWorks is the corollary to general ply-based modeling techniques. This functionality strives to further link composite simulation with manufacturing by allowing the stress analysist to choose from a selection of specific composite products. The analyst can interact with these products at scales typical of the given product and which are frequently at scales more homogenized than scale 2, while ply slices technology maintains a simulation model at scale 2 in the background. Several specific examples including uni-directional, woven and filament wound products using this new technology will be presented.

Newer Posts

Older Posts

E-Bülten - Dergi Üyeliği

Abone Ol
X